Professional SPF roof installation, coating, and insulation in Erwin, NC. Free inspections. Call today for a no-obligation estimate.
Comprehensive spray foam roofing and insulation services tailored for Erwin properties.
When your roof is structurally sound but the surface is deteriorating, restoration is the smart investment. We clean, repair, and recoat your entire roof with a warranted system that performs like new at a fraction of replacement cost.
Seamless waterproofing membranes applied over existing roof surfaces to eliminate leaks and ponding water permanently. Our spray-applied systems conform to every detail and create a monolithic barrier with no seams to fail.
Elastomeric coatings for standing seam, corrugated, and R-panel metal roofs. We seal rust spots, failing fasteners, open seams, and ridge caps — stopping leaks and adding reflective energy savings in a single application.
Stop chasing flat roof leaks with temporary fixes. Our diagnostic approach pinpoints the exact failure point, and our repair methods address the root cause — whether it is failed flashing, membrane damage, or ponding water that needs re-sloping.
Hail, wind, and debris damage demand immediate attention and thorough documentation. Our crews respond quickly, document all damage with photos and measurements that satisfy insurance adjusters, and restore your roof completely.
Pre-purchase, post-storm, or routine maintenance — our inspection reports give you the data you need to make informed decisions about your roof. Infrared moisture scans reveal trapped water invisible from the surface.
From minor surface patches to full-section refoaming and recoating, our repair crews restore SPF roof performance using materials compatible with your existing system. Every repair is blended seamlessly and warranted.
Active roof leak? We locate the source using advanced detection methods, then repair it permanently at the root cause. No guesswork, no temporary patches — just lasting results backed by our workmanship warranty.
Transform your crawl space from a moisture liability into a conditioned, energy-efficient part of your building envelope. Spray foam eliminates condensation, prevents mold conditions, and dramatically improves floor comfort above.
Large-scale commercial roof restoration using SPF and coating systems that extend roof life by 20 or more years without the cost and disruption of full replacement. Phased scheduling available to keep your business operational.
Our replacement process is thorough: remove existing roofing to the deck, inspect and repair substrate, apply closed-cell SPF to specified thickness, and finish with a UV-protective coating. The result is a monolithic roof system with no seams to fail.
Upgrade your attic insulation from fiberglass or cellulose to spray foam and feel the difference the same day. SPF does not settle, sag, or leave gaps — it expands to fill every cavity and seals air leaks that other materials miss.
Protect your roofing investment with a maintenance program designed for your specific roof type. Our crews document every visit with photos and condition ratings so you always know the exact state of your roof.
High-performance silicone roof coatings that resist ponding water, UV degradation, and extreme temperatures. Unlike acrylics, silicone does not re-emulsify in standing water — making it ideal for flat roofs with drainage challenges.
New spray polyurethane foam roof installation that creates a seamless, self-adhering membrane with the highest R-value per inch of any roofing system. Energy-efficient, leak-proof, and engineered to last 30 to 50 years with periodic recoating.
Roof leaks and energy waste do not care how small your town is. In Erwin, NC, Lapolla Industries provides the same professional spray foam roofing and insulation services that protect large commercial facilities — scaled to fit your property and your budget. We diagnose the real problem, explain your options honestly, and fix it right the first time.
Our Erwin customers stay with us because we deliver results, not excuses. Whether it is a persistent flat roof leak, a foam roof that needs recoating, or an attic that turns into a furnace every summer, Lapolla Industries has the equipment and expertise to solve it permanently. One call to (866) 605-0362 is all it takes to get started.
Here is what sets Lapolla Industries apart from other contractors in Erwin.
Every project comes backed by manufacturer material warranties plus our own workmanship guarantee. We handle all warranty registration so you are always covered.
Every project starts with a no-obligation inspection using infrared moisture scanning and visual assessment. We identify every issue and provide an honest, transparent estimate.
SPF roofing delivers the highest R-value per inch of any commercial insulation. Our customers typically see 20 to 40 percent reductions in heating and cooling costs after installation.
Spray foam roofing eliminates tear-off waste, reduces energy consumption, and extends roof life by decades. Our systems help property owners reduce their environmental footprint while saving money.
Our crews live and work in the communities we serve. We understand local building codes, climate conditions, and the best SPF systems for your specific region.
Have questions about spray foam in Erwin? We have answers.
A properly installed SPF roof in Erwin can last 30 to 50 years with periodic recoating every 10 to 15 years. The closed-cell foam itself does not degrade — only the protective topcoat needs maintenance. Many spray foam roofs installed in the 1970s are still performing today.
Yes. Every project in Erwin begins with a no-obligation roof inspection. Our crews assess the condition of your existing roof, identify problem areas using infrared moisture scanning when needed, and provide a detailed estimate with photos and recommendations. There is never a charge for the initial inspection.
Yes. Spray foam applied to crawl space walls and rim joists creates an airtight moisture barrier that eliminates condensation, musty odors, and cold floors. For Erwin homes with persistent crawl space moisture issues, closed-cell foam combined with vapor barrier encapsulation provides a permanent solution.
Absolutely. SPF roofing performs exceptionally in both extremes because the closed-cell foam provides continuous insulation without thermal bridging. In hot Erwin summers, the reflective coating reduces surface temperatures by up to 50 degrees. In winter, the insulation value keeps conditioned air inside.
Spray foam is one of the best solutions for flat and low-slope roofs in Erwin. The seamless application eliminates the seams and joints where conventional flat roof systems fail. SPF also self-levels to eliminate ponding water — one of the biggest causes of flat roof leaks and premature failure.
Closed-cell foam is denser, provides a higher R-value per inch (R-6.5 vs R-3.7), and acts as a vapor and moisture barrier. Open-cell foam is lighter, more flexible, and more affordable. For roofing applications in Erwin we typically recommend closed-cell for its waterproofing properties. For interior wall insulation, either type may be appropriate.
Our reputation is built on results. Here is what our customers say.
"Lapolla Industries waterproofed our commercial building after we had recurring moisture issues. They applied a spray foam base with a silicone topcoat and the building has been completely dry since. Outstanding results."
"Full roof replacement on our 12,000 square foot commercial building. Lapolla Industries removed the old single-ply membrane and installed spray foam with a silicone topcoat. Clean work, professional crew, and a 20-year warranty."
"Our metal warehouse roof had been leaking at the ridge and sidewall transitions for years. The coating crew sealed every penetration, fastener, and seam. Completely watertight now and the energy savings are a great bonus."
Lapolla Industries proudly serves property owners in these cities near Erwin.